Imperial DS1 Manuel d'utilisateur télécharger pdf (Page 13)

- 12 -

10. Sat name edit: If you want to change the satellite name, select the satellite and press Sat

Name Edit key (Yellow color key) on the RCU to display the command box. The keypad

dialog will appear. Using the arrow keys on the RCU, you can edit the satellite name. Delete

TP : If you want to delete a Transponder, please select the Transponder which you want to

delete and then press MENU key on the RCU to display the command box. Then select

Delete TP command. A confirm message box will be displayed.

12. Re-Sync : When all the locations of searched satellites are shifted for any reason, you can

realign all of them once you adjusted one satellite location.

13. Go to 0 for DiSEqC 1.2 : When you install the motor of DiSEqC 1.2 antenna, you can

select this function to move the center of the antenna to 0°.

14. Search Option : Imperial DS1 allows you to

search channels with convenient options as

shown below.

· FTA Only

· Not searched TP only

· Sort by Scramble

If you select Sort by Scramble, Imperial DS1

sorts the scrambled channels automatically.

If you select not searched TP only, Imperial

DS1 searches channels in the TP, which were

not searched.

5.2 Channel Search  2) Fixed

1. Antenna : Select your antenna number.

2. Satellite : Select desired satellite using

arrows keys. Pressing the OK key will also

display a list of satellites.

You can see the information of the selected

satellite on the right side.

Edit Mode: If you want to edit preprogrammed

data such as Transponder, Frequency, Symbol

Rate, Polarization and 22 KHz, please press

EDIT mode key (Red color key) on the RCU to

display the command box. You can then move

into those columns to change the value. Please

refer to Section 20, List 4 to 14 for the remaining

options.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Pas de commentaire

Imperial DS1 Manuel d'utilisateur Page 13